zencontrol
Smart Switch Touch Six-button Smart Switch DALI-2 Wired and Wireless - Requires Engraving
Order code: zc-sst-6sw-wht
Beautiful and stylish Capacitive Touch with anodised frame and glass faceplate.
Smart switch with 6 DALI-2 programmable back lit buttons to suit 84 mm wall mount.
Supports both DALI-2 wired and wireless applications.
Engraving
When engraving, download and fill out the Lumen Laser Engraving Form, and email it through to support@lumenresources.com.au along with your order number.
Features
-
Audio feedback, an inbuilt speaker provides user feedback
-
Visual and audio warn indicators, audio cue or flashing can be configured
-
Available in 2 stylish colours, Matte Black frame with black glass and silver frame with white glass
-
Used on wired and wireless DALI networks
-
Selectable button actions on DALI-2 application controller
-
Inbuilt configurable RGBW LEDs
-
Can work as a stand alone system, wireless mesh models do not require a local control interface
-
In-built temperature sensor that can be monitored through the BACnet and MQTT interface
-
Selectable button actions on DALI-2 application controller
Dimensions
| Fixing centres | 84 mm |
| Mounting |
Fits on standard C-clip bracket |
| Dimensions | W 75mm / H 117mm / D 34mm |
Wiring Notice
-
The DALI line is not SELV. It must be treated like LV mains
and treated with the same precautions and wiring regulations. -
This product is not bus powered and requires the 240V Line Neutral supply to be connected
Specifications
| Supply | 220 - 240V 50Hz |
| Control system | Wired DALI-2 Wireless IEC62386-104 over Thread |
| Radio support | IEEE 802.15.4 |
| Frequency ban | 2.4 GHz |
| Max radio tx power | +8 dBm |
| DALI line current | 2mA |
| Wiring | 0.5 - 2.5 mm2 Strip 8 - 9mm |
| Operating temperature | 0 to 55°C |
| Material | PC UV Stabilised, toughened glass, aluminum |
| Classification | Class II |
| Ingress protection | IP20 |
| Compliance Standards |
IEC 61347-2-11 CISPR 15 IEC 62386-301 EMC-2004/108/EC LVD-2006/95/EC |
Configuration Options
Standalone Wired or Wireless
The smart switches can be used on a standalone DALI-2 network, or a standalone wireless bluetooth network for small configurations and simple systems. Configure button functionality and status colour via bluetooth smart phone.
Wired 101 mode
The smart switch can be wired to a DALI-2 wired network as a DALI-2 switch. Button functionality and LED status colours are programmed through a central head end.
Enabled after a 101 DALI-2 power supply has been connected to the DALI terminal and the device has not been added to a wireless 104 application controller.
Wireless 104 mode
Similar to wired mode, but without cables. Connect to a wireless application controller and configure button functionality and LED status colours through a central head end.
104 mode is enabled after the device has been added to a 104 application controller such as zc-iot-fc.
Bridge mode 104 + 101 mode (Wireless and Wired)
The same functionality as a the wireless system, however with the ability to connect wired DALI-2 devices to the switch and have those DALI-2 devices appear and be programmed on the wireless network.
104 + 101 bridge mode is enabled after the device has been added to a 104 controller and a 101 power supply has been connected to the DALI terminals.
